manualshive.com logo in svg

Iconix HD-RH1, User Manual

Share
Download
Iconix HD-RH1 User Manual Download Page 11

HD-RH1 User Manual 

 

      Quick Start: Hardware Setup 

 

 

 

10

Standard Hardware Connection Tips  

 

1.  Verify that the CCU power switch is in the OFF position.  

2.  Attach the lens to the camera head.  

3.  Connect the camera head to the head cable.  Line up the red dots on the connector 

with the red dots on the camera and press in.  

4.  Connect the head cable into the CCU connector on the front panel. 

5.  Connect the video output monitor to the CCU via the appropriate cable. 

6.  Connect the DC power supply cord into the DC 12V connector on the controller back 

panel. 

7.  Turn on the video monitor. 

8.  Flip the controller power switch to the ON position. 

9.  Press the BARS button and verify that color bars are displayed. 

 

 

Remote Control / RCP 

 

The HD-RH1 may be remotely controlled through the RS-232 remote control interface.    
For more information, please contact an Iconix representative. 
 

 

Safety Precautions  

 

Please read and follow the safety guidelines before using the HD-RH1. 
 

•

 

12V power supply:  

ƒ

 

Nominal Voltage  = 12V DC 

ƒ

 

Absolute Minimum = 9V DC 

ƒ

 

Absolute Maximum = 22V DC (peak) 

ƒ

 

3A maximum current requirement 

 

•

 

Do not use the camera in a place where it could come in contact with water, moisture, 
steam, dust, or smoke. This could cause fire, electric shock, or camera failure.  

•

 

Use only the specified power source voltage and connection cord. The wrong source 
could result in fire or electric shock.  

•

 

Do not use the camera in situations that exceed the temperature specifications  
( 0° to 40° C ). This may cause malfunction and/or damage the camera. 

•

 

Do not touch the power cord or cables during a thunderstorm. 

Summary of Contents for HD-RH1
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands