Iconic i2015 CNC, Owner'S Manual

Page: 7 / 35

Machine Safety
1. For support/warranty purposes, keep a record of your machine’s model & serial number.
2. Ensure the power is off before installing a new cutting tool.
3. To avoid the risk of danger, make sure that the workpiece is properly secured.
4. Please use a collet that match cutting tools (See Chapter 2).
5. Be sure to apply recommended lubricant.
6. Be sure to home X/Y/Z axes when the power source is unstable or after emergency
button is pressed.
Electrical Safety
1. To ensure safety, all maintenance should be made by a knowledgeable technician.
2. To ensure safety, be sure ground wire is connected properly.
3. Do not tamper with the safety cover, limit switch or any other accessories
(see 1. Safety - Components Section).
4. To avoid electrical shock, do not contact Control Board, Power Supply Board, Motor,
Control Box when the power is on.
5. Power off the machine when power supply is unstable.
6. To prevent electromagnetic interference, A) please avoid connecting power cord to an
extension cord. Connect the power cord of the machine to an independent power supply
is highly recommended. B) Not connecting dust collector power to the machine power
outlet is highly recommended.
Environment Safety
1. Ensure machine is placed in steady ground.
2. Store machine in dry environment. Avoid exposure to direct sunlight. Suggested room
temperature: 0°C ~ 45°C. Relative Humidity: 40% ~ 75%
i2015 OWNER’S MANUAL
of 7 35