Setting Up A Project
1.
Plug in your USB Stick, which contains your G-Code files. Turn on machine’s power. A
welcome message will appear on the LCD Screen; press the
Enter
key on your Keypad,
which will move the Spindle to its default Home Position. Handheld controller will ask
you to confirm that there is a USB Stick inserted. Press Enter to continue.
2.
The LCD screen will display the Main Menu. Move the cursor to
Select File
, and press
Enter
to browse the files located on your USB Stick.
3.
Browse the USB directory (which is able to display 48 files max.), move the cursor to
select the desired file, and press
Enter
.
4.
Choose
Manual Jog Mode
to set your Position of Origin.
5.
Using the X+, X-, Y+, Y-, Z+, Z- keys, move the Spindle on the 3 Axis’ to set your
Position of Origin (the tool should be touching the top of the material on the Z Axis).
6.
Move the cursor to
Enter to set ORG
, and press
Enter
to set the new Position of Origin.
7.
Coordinates Confirmation message will pop up.
Mark these coordinates down if you are
running the same operation multiple times, or if you are using a multi-tool operation.
Refer to “Repeating Origin Setting” in this Manual.
Press
Enter
to continue. All values
should change to
0.0mm
, indicating that this is the new Position of Origin.
8.
Press
Back
on your handheld controller to proceed.
9.
If you would like, you may choose to use the
Border
function (not required), which will
run a simulation of the projects dimensions, to ensure that your project will not hit a limit
switch or go beyond your material size.
10.
Select
Process
to begin machine operation. Move the cursor to select machining speed:
11.
Operation will begin by going through Z-Axis Auto Indexer process (see Page 20).
Please follow Safety Instructions, and ensure that your material is properly
secured to the table.
i2015 OWNER’S MANUAL
of
17
35
Speed
Default Feedrate
Spindle Speed
Suitable For
Smart Low
600mm/min
20,000 RPM
Hard Materials, 5-8mm Depth Per Pass
Smart Normal
2,400mm/min
20,000 RPM
Router/Raster Carving, 3-5mm Depth
Smart High
4,800mm/min
20,000 RPM
Soft Materals, 0-3mm Depth
Custom
Speed
600 - 6,000mm/min
(Parameter must be
set in G-Code file)
6,000 - 20,000 RPM
(Parameter must be
set in G-Code file)
Advanced machining
Summary of Contents for i2015 CNC
