ICONE SMART.E, Instructions Manual

Page: 70 / 84

5. Adjustment and maintenance
5.1. Adjustment
Rearview mirrors
Front and rear disc brake
The two rear-view mirrors are mounted on the left and
right sides of the handlebar and can be adjusted by
manually rotating the stem until the mirror is brought to
the desired position.
The wear of the disc and pads is automatically
compensated, therefore it has no effect on the operation
of the brake and does not require adjustments.
If excessive travel is found and the lever gets too close to
the knob, operating the brake could mean the presence
of air in the circuit or the irregular functioning of the brake
itself.
An effective braking action must begin after about 1/3 of
the brake lever stroke.
If the brake malfunctions, check the state of wear of the brake pads; if the
thickness is very small, they must both be replaced, an operation to be
carried out in an authorized service point.
After replacing the pads, operate the brake lever several times to reposition
the pads and bring the lever to the right position.