Diagram 6
6
Installation completed
The driver installation has completed
successfully. Click the “Close” button.
7
Copy the software control panel
shortcut logo to your desktop
Open the previous “Mac” folder.
Copy the ‘Umix1008” software panel
shortcut logo and paste it to your
desktop.
Diagram 7
8
Launch the software control panel
Click the Umix1008's software control
panel shortcut logo you have just
copied to your desktop to launch
the software control panel.
Diagram 8
9
Audio MIDI setup
Open the “Audio MIDI setup” window
and check if the Umix 1008 Satellite
device has setup properly as shown
below in diagram 9. If your Umix 1008
Satellite device does not appear on the
system settings.It means the driver did
not install properly, go through the
“Driver Installation” procedure again.
Diagram 9
6
Icon Control Panel
