ICON QCon EX G2, User Manual

Page: 8 / 47

8
Tips: The DAW button cannot be activated if DAW software is running.
Tips: QconEX G2 will memorize your last selected DAW mode and re-enter
the same mode a few seconds after it has been switched on. (i.e. DAW
mode selection is not needed if the last mode is being used.)
Rear Panel Layout
1. User A / User B 1/4” TRS connectors
These 1/4” TRS connectors are able to connect to foot pedals (SPD-01) to
activate your selected functions. To set their parameters, select USER A and
USER B parameters in Mackie control mode.
2. USB port
Connect your QconEX G2 to your Mac/PC via this USB port.
3. 12V/5A power adapter
Connect the provided power adapter here.
( Note: QconEX G2 is not able to work without the provided power adapter
connected. The USB bus power is not able to provide sufficient power supply for
QconEX G2.)
1 3 2