ICON QCon EX G2, User Manual

Page: 13 / 47

13
3. Setup your DAW
The QconPro G2 has built-in Mackie Control, LogicPro and HUI protocol
which will save you considerable trouble in setting up the device at your DAW.
Simply add the “Mackie Control” or “HUI” device under the “MIDI Controller” on
your software. After the Mackie Control or HUI device has been added, select
QconPro G2 controller as your MIDI input and output device in your DAW.
For the software below, please use Mackie Control
Nuendo/Cubase
TM
, Samplitude
TM
, Bitwig
TM
, Reason
TM
, Reaper
TM
, Studio One
TM
and Ableton Live
TM
.
The software below, please use logic Pro Mackie Control
or the software below, please use HUI
Pro Tools
TM
.
(
Tips:
You may also refer to our website at
www.iconproaudio.com
, where
you’ll find set up illustrations for different DAW’s in each controller (QconEX
G2) product page’s “Setup demo” section.
For DAW’s not on our setup demo list, please refer to your software user
manual for hardware setup.)
Cubase
2
5
8
3
6
9
1
4
7
iCON QCONPRO G2 V1.00
iCON QCONPRO G2 V1.00
iCON QCON EX3 G2 V1.00
iCON QCON EX3 G2 V1.00
iCON QCON EX2 G2 V1.00
iCON QCON EX2 G2 V1.00