Switch Access
29
Figure 30 Access through Telnet
Step 3: Click OK. The Telnet CLI is displayed. Then you can run the commands (as
shown
in
Table 12) to perform operations.
7.3 Access through Web
Step 1: Connect the network port of a PC to the Ethernet port of the switch with a network
cable.
Step 2: Enter the IP address of the device in the address box of the browser. The user login
interface is displayed. You can log in to the Web UI by default user name "admin" and
password "123".
Note
：
IE8.0 or a later version is recommended.
For details about how to access the device and other operations, refer to the Web operation
manual
ICON Industrial Engineering (IIE)
