ICON proCon D500 Series, Operating Manual

Page: 3 / 30

D500 | D520 Series Operating Manual
3 ◀◀
|
Preface
Please read this manual carefully before use.
When receiving the instrument, please open the package carefully, check to ensure the instrument and accessories have not been
damaged during transportation. If any issues are found, please contact our after-sales service department or regional customer service
center. Ensure item is returned in the original packaging.
Only properly skilled authorized personnel should carry out installation, setup and operation. Ensure that the power cable is physically
separated from the power supply during the initial wiring connection or repair.
For example,
1. Apparent damage to the analyzer
2. The analyzer does not work properly or provides specified measurements
3. The analyzer has been stored for a long time in an environment where the temperature exceeds 70°C
The analyzer must be installed by licensed professionals in accordance with relevant local specifications, and instructions are included in
the operation manual. Comply with the technical specifications and input requirements of the controller.
Features
‰
Large color LCD display
‰
Intelligent menu operation
‰
Data recording / curve display
‰
Multiple automatic SimplCal
®
calibration
‰
Manual and automatic temperature compensation
‰
Three relay control switches
‰
4-20mA & RS485 multiple output modes
‰
Multi-parameter display — simultaneously shows pH, ORP and temperature
‰
Password protection