background image

23

HOW TO USE THE SOUND SYSTEM

To play music or audio books through the console 

sound system while you exercise, plug a 3.5 mm male 

to 3.5 mm male audio cable (not included) into the 

jack on the console and into a jack on your personal 

audio player; make sure that the audio cable is fully 

plugged in. Note: To purchase an audio cable, see 

your local electronics store. 

Next, press the play button 

on your personal audio 

player. Adjust the volume 

level using the volume 

increase and decrease 

buttons on the console or 

the volume control on your personal audio player. 

THE SETTINGS MODE

The console features a settings mode that keeps track 

of treadmill usage information and allows you to select 

a unit of measurement for the console.

To select the information mode, insert the key into the 

console while holding down the Stop button. Then, 

release the Stop button. Note: If a workout has been 

selected, you may have to press the Stop button twice 

to exit the workout before you can access the informa-

tion mode. When the information mode is selected, the 

following information will be shown: 

An “E” for English miles or an “M” for metric kilometers 

will appear in the display. Press the Speed increase or 

decrease button to change the unit of measurement, if 

desired. 

To exit the information mode, remove the key from the 

console, or press the Stop button repeatedly.

ETPF59117

Summary of Contents for PRO-FORM PREMIER 500





































Reviews: