background image

Part No. 451166 R0723A 

Printed in China © 2023 iFIT Inc.

To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to 

provide the following information when contacting us:

•   the model number and serial number of the product (see the front cover of this manual)

•   the name of the product (see the front cover of this manual)

•   the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED DRAWING 

near the end of this manual)

ORDERING REPLACEMENT PARTS

This electronic product must not be disposed of in municipal waste. To  

preserve the environment, this product must be recycled after its useful life 

as required by law.

Please use recycling facilities that are authorized to collect this type of waste in 

your area. In doing so, you will help to conserve natural resources and improve 

European standards of environmental protection. If you require more information 

about safe and correct disposal methods, please contact your local city office or 

the establishment where you purchased this product.

RECYCLING INFORMATION

UK/EU DECLARATION OF CONFORMITY

PFTL90924-INT contains the BMD-ICN-1 Bluetooth module.

Hereby, iFIT Health & Fitness declares that the radio equipment type BMD-ICN-1 is in compliance with Directive 

2014/53/EU and Radio Equipment Regulation 2017.

iFIT Health & Fitness, 1500 S 1000 W, Logan, UT 84320, USA

This declaration of conformity is issued under the sole responsibility of the manufacturer.

Object of the declaration: FCCID OMCBMD1 - Broadcast Frequency: 2.402GHz to 2.480GHz 

Transmit Power: +4dBm

Certification: Article 3.1a - Safety EN 62479:2010, EN 62368-1:2014/AC:2015, Article 3.1b – EMC EN 301 489-17 

V3.2.4, Article 3.2 – Radio parameters EN 300 328 V2.2.2

UK Representative: ICON Health & Fitness Ltd, Unit 1D The Gateway, Fryers Way, Silkwood Park, Ossett, 

WF5 9TJ, United Kingdom

EU Representative: iFIT Health & Fitness SAS Business Park, 5 rue Alfred de Vigny 

78112 Fourqueux, France

Summary of Contents for PRO-FORM CARBON TLX

































Reviews: