10
8
9
24
26
37, 58
17
11
25
Hexagonal
Holes
3
27
4
9. Orient the Console Cover (3) as shown, and
slide it onto the Upright (27).
Tip: Avoid pinching the Main Wire (25). Insert
the Pivot Bracket (11) on the Handlebar (4) into
the Upright (27).
Attach the Pivot Bracket (11) with two M8 x
58mm Bolts (24) and two M8 Locknuts (17).
Make sure that the Locknuts are in the hex-
agonal holes.
Tip: If necessary, rotate the Handlebar (4) to
a different angle so that there is sufficient
space to tighten the M8 x 58mm Bolts (24)
into the Upright (27).
8. Orient the Shield Cover (26) as shown, and
press it onto the Left and Right Shields (37, 58).
Avoid pinching
the Main Wire (25)
