9
7. Slide the Right Upright Sleeve (96) up against
the console assembly. Attach the Right Upright
Sleeve with a #8 x 3/4" Screw (4) and a #8 x
3/4" Tek Screw (84) as shown.
Attach the Left Upright Sleeve (not shown) to
the console assembly as described above.
4
96
84
7
Console
Assembly
8. With the help of a second person, raise the
front of the treadmill and insert the crossbar on
the Base (83) into the cutout in the cardboard
stand as shown.
Have the second person
hold the treadmill to prevent it from moving
forward or backward.
Firmly tighten the four 3/8" x 3 3/4" Bolts (72).
With the help of a second person, lower the
treadmill off the cardboard stand.
Cardboard
Stand
72
83
72
8
9.
Make sure that all parts are properly tightened before you use the treadmill.
Keep the included hex key
in a secure place; the hex key is used to adjust the walking belt (see pages 22 and 23).
To protect the floor
or carpet from damage, place a mat under the treadmill.
