8
4. Have a second person hold the console assem-
bly near the Uprights (73, 74).
Connect the Upright Wire (75) to the Console
Wire Harness (71).
See the inset drawing. The
connectors should slide together easily and
snap into place.
If they do not, turn one con-
nector and try again.
IF THE CONNECTORS
ARE NOT CONNECTED PROPERLY, THE
CONSOLE MAY BE DAMAGED WHEN THE
POWER IS TURNED ON.
Remove the long tie from the Upright Wire (75).
71
Console
Assembly
4
75
Long
Tie
74
5. Insert the brackets on the Handrails (99) into the
Uprights (73, 74).
Make sure that no wires are
pinched.
73
5
74
99
75
73
99
71
6. Partially tighten three 3/8" x 1" Bolts (64) with
three 3/8" Star Washers (90) into the Right
Upright (74). Next, partially tighten three 3/8" x
1" Bolts with three 3/8" Star Washers (not
shown) into the Left Upright (73).
Then, firmly
tighten all six Bolts.
73
74
64
64
90
90
6
