ICON PATROL3 WP CE, Manual

Page: 8 / 57

FIG.1: FOOTWEAR MINIMUM UPPER
HEIGHT DEFINITION OF H1 AND H2
FIG.2
CHART 3: DIMENSIONS FOR MATERIAL AREAS SHOWN IN FIG.2
Y
X
F
2
G
5˚
1
Size
(Paris Points)
Size
(English)
“ F ” “ G ”
Minimum (mm) Maximum (mm)
38 and Below 5 and below 40 120
39-42 5.5 to 8 50 125
43 and above 8.5 and above 55 130
The lower tangent of Zone 2 is used to define the lower limits of measure-
ment
F & G . Zone 2 is located by centering point X over the natural center of
the ankle as felt through the footwear when worn.
Zone 1 Shin Region 1
Zone 2 Ankle Region 2
Keys for
F
and
G
See Chart 3
Area A
Area B
FIG.2 KEY
PROTECTION LIMITATIONS
GENERAL USE:
Patrol3 WP CE Boots are intended to protect against ambient conditions without excessively impairing the user’s ability to control the
motorcycle while operating the foot controls. Patrol3 WP CE Boots are designed with safety and dexterity in mind. Patrol3 WP CE Boots
are considered to be PPE because they are designed and manufactured to provide limited protection to the foot and ankle during an
accident or in the event of a fall from a motorcycle. Additional particular hazards encountered during an on-road motorcycle accident
may include: impacts with the rider’s motorcycle, conflicting vehicles, and other roadside objects. The chances of serious injury are
increased if the foot becomes trapped under the motorcycle during a sliding impact.
Patrol3 WP CE Boots will not prevent traumas
caused by high-energy impacts, traumas caused by severe forces of bending, twisting, torsion, or crushing as the result of striking an
object, or traumas caused by extreme movements or massive penetrations. The force levels used in the tests
do not compare directly to
the forces motorcyclists are exposed to in real-world accidents, therefore, products that meet the requirements of the EN 13634:2017
Standard may only reduce the severity of some minor injuries. No protective footwear, can offer complete protection against all injuries,
the principle is to create a product that will help to reduce the risk of injury to the area, for which, the PPE was designed to provide
limited protection.
MISUSE THAT WILL DEGRADE PATROL3 WP CE BOOTS PERFORMANCE:
Patrol3 WP CE Boots must be worn to provide any protection. Improper use of the Patrol3 WP CE Boots can seriously compromise
effectiveness and reduce performance. In order for the Patrol3 WP CE Boots to retain their original protective capabilities only use the
Patrol3 WP CE Boots for the purposes described in the “Use Restrictions and Limitations” section of this user manual. Never tamper
with any part of the boots. Never bend or twist the boots excessively as this constitutes improper use. Do not paint the boots or use
colorants of any nature.
ENVIRONMENTAL CONDITIONS THAT WILL DEGRADE PATROL3 WP CE BOOTS PERFORMANCE:
Contamination with foreign substances and/or improper care can seriously compromise the Patrol3 WP CE Boots‘ effectiveness and
reduce their performance. Do not expose the Patrol3 WP CE Boots to extreme, direct sunlight or extreme moisture. Do not expose the
Patrol3 WP CE Boots to extremely high or low temperatures like those found in a closed car or outdoor storage.
SAFETY WARNINGS
2021-07-02_Patrol3WPCEBootManual.indd 12-13 7/02/21 1:19 PM