12
11. Priming the system
The
iCON
NXT Pro
is supplied with two 1” BSPT male swivel unions.
The controller can be removed from the pump by removing the stainless steel retaining clip.
Once the clip is removed the connection fitting will slide from the controller body.
Due to the non-return mechanism inside the controller, the pump should be primed
before fitting the controller OR filled through the pump priming port.
12. Standards and Approvals
SAA Approvals
is accredited by the Joint Accreditation
Service of Australia and New Zealand (JAS-ANZ) as a third
party certification body to issue of Certificates of Approval for
declared and non-declared electrical equipment that has
proven to comply with the safety requirements of the
applicable Australian Standard.
Pumps that carry the AS/
NZ4020 Drinking Water Approval
demonstrate compliance with requirements of Australia &
New Zealand Standards of products that come into contact
with water intended for human consumption. This approval
also ensures that the water coming from the pump will not be
contaminated by toxic materials or metals. It also means the
water will not support the growth of micro-organisms and will
not cause a change in taste or appearance.
CE marking
is a certification mark that indicates conformity
with health, safety and environment. The CE marketing
represents a manufacturer’s declaration that products comply
with the EU’s New Approach Directives. These directives not
only apply to products within the EU but also for products that
are manufactured in or designed to be sold in the EEA.
