ICON NordicTrack T 20.0 User Manual Download Page 21

21

Press the iFit Live button to download the next

workout in your schedule. Press the My Trainer

button, the My Maps button, the World Tour button,

or the Event Training button to download the next

workout of that type in your schedule. Press the

Compete button to compete in a race that you have

previously scheduled.

For more information

about the iFit Live workouts, please see

www.iFit.com.

Note: If there are no workouts of

the selected type in your schedule, the next work-

out in your schedule will be downloaded.

When you select an iFit Live workout, the display

will show the duration, the distance, and the name

of the workout. The display will also show the ap-

proximate number of calories you will burn. After a

few seconds, the display will show the maximum

speed and incline settings of the workout. If you se-

lect a competition workout, the display will count

down to the beginning of the race.

Note: Each iFit Live button can also run two demo

workouts. To use the demo workouts, remove the

iFit Live module from the console and press one of

the iFit Live buttons.

5. Start the workout.

See step 3 on pages 19 and 20.

During some workouts, the voice of a personal

trainer will guide you through your workout. You

can select an audio setting for your personal trainer

(see THE INFORMATION MODE on page 22).

To stop the workout at any time, press the Stop

button. The time will begin to flash in the display.

To resume the workout, press the Start button or

the Speed increase button. The walking belt will

begin to move at the speed setting for the first seg-

ment of the workout. When the next segment of the

workout begins, the treadmill will automatically ad-

just to the speed and incline settings for the next

segment.

6. Follow your progress with the displays.

See step 5 on page 17.

The My Trail tab will show a map of the trail you

are walking or running, or it will show a track and

the number of laps you complete.

During a competition workout, the Competition tab

will show your progress in the race. As you race,

the top line in the matrix will show how much of the

race you have completed. The other lines will show

your top four competitors. The end of the matrix

represents the end of the race.

7. Measure your heart rate if desired.

See step 6 on page 18.

8. Turn on the fan if desired.

See step 7 on page 18.

9. When you are finished exercising, remove the

key from the console.

See step 8 on page 18.

For more information about the iFit Live mode, go

to www.iFit.com.

Summary of Contents for NordicTrack T 20.0





































Reviews: