12
10. First, tighten the 3/8" x 1 1/2" Screws (3) on each
side of the treadmill. Then, tighten the 3/8" x
2 1/4" Screws (1) on each side of the treadmill.
3
1
10
9. Tighten two 3/8" x 1 1/2" Screws (3) with two
3/8" Star Washers (2) into the desk assembly
(D) as shown.
Make sure that the bracket on
the Inner Left Upright (63) slides between the
Desk Support Frame Cover (87) and the Desk
Support Frame (88). Insert the wires into the
top of the Inner Left Upright. Make sure that
no wires (E) are pinched.
See step 7.
Tighten two 3/8" x 1 1/2" Screws (3)
on the right side.
3
2
2
63
D
87
88
9
3
E
