Lowpass Filter
The key –
This key activates a lowpass filter for the internal synth. This has
the effect of darkening any internal sound. A lowpass filter lets the low
frequencies pass, but filters out the higher ones, making any synth patch seem
darker or mellower.
Saving and Recalling Your Control Settings
After you have programmed the controls on your InSpire-air, you may want to
save your settings so that you can easily recall everything you have
programmed. There are 20 storage locations available numbered from F1-F20.
” If you are going to use two, or even three, sets of control
settings in a serial fashion, that is, back and forth between
them, use F slots that are in numerical sequence. To
rearrange your current slots, simply use one slot as a “hold”
slot. Assign a set that needs to be moved to the HOLD, then
re-assign it to the slot that is conveniently in series.”
GRP A
GRP B
GRP C
GRP D
NRPN
SNAPSHOT
PANIC
GLOB
CHAN
B
MUTE
LAY
123456
DEV. ID
VEL.CURVE PROG
TRANS
CC
CHAN
GLOB
BANK LSB
MIN
MSB
RECALL
ZONE
STORE
OCT
MAX
F P V
GRP A
GRP B
GRP C
GRP D
NRPN
SNAPSHOT
PANIC
GLOB
CHAN
B
MUTE
LAY
123456
DEV. ID
VEL.CURVE PROG
TRANS
CC
CHAN
GLOB
BANK LSB
MIN
MSB
RECALL
ZONE
STORE
OCT
MAX
F P V
36
To save a set of assignments, press the “Save
(Ad Save)” key. It will light up. STORE will
appear in the center of the LCD. The letter F, with
a number from 1 to 20 will appear in the lower
right of the screen indicating the storage slot that
will be assigned. Select a storage space number
by using the jogwheel or +/- keys. (The numbered
buttons will not work for this function.) Press the
jogwheel to store the current set of
fader/knob/pad and other assignments in that
slot number.
The factory presets are originally contained in the storage slot F1.
Michael says:
To recall any group of settings you have
stored in the “F slots:”
Press the
RECALL (Ad recall)
button. The
button will light up and the lower right of the LCD
screen will show F1-F20.
Select which group you want to re-establish on
InSpire-air's panel by using the jogwheel or +/- keys
to scroll through the different storage slots.
Press the jogwheel to enter and activate it. If you
press RECALL again, the last value entered will
reappear on the LCD.
