background image

18

HOW TO CHANGE THE INCLINE OF THE RAMP

To vary the motion of the pedals, you can change the 

incline of the ramp. To raise the ramp, simply pull the 

ramp handle (H) upward to the desired incline level. 

To lower the ramp, press the latch button (I), pull the 

ramp handle (H), and lower the ramp to the desired 

incline level. Then, release the latch button and 

engage the latch pin into one of the adjustment holes 

in the frame. Make sure that the latch pin is firmly 

engaged in one of the adjustment holes in the 

frame.

HOW TO EXERCISE ON THE ELLIPTICAL

See the drawing at the right. To mount the elliptical, 

hold the handlebars (J) or the upper body arms (K) 

and step onto the pedal (L) that is in the lower position. 

Then, step onto the other pedal. Push the pedals until 

they begin to move with a continuous motion. Note: 

The pedals can turn in either direction. It is recom-

mended that you turn the pedals in the direction 

shown by the arrow; however, for variety, you can 

turn the pedals in the opposite direction.

To dismount the elliptical, wait until the pedals (L) come 

to a complete stop. Note: The elliptical does not 

have a free wheel; the pedals will continue to move 

until the flywheel stops. When the pedals are station-

ary, step off the higher pedal first. Then, step off the 

lower pedal.

J

K

L

H

I

Summary of Contents for GOLD'S GYM STIDE TRAINER 550i





































Reviews: