iCON iSOLAR 4” PDP Instruction Manual
7
SECTION TWO – Installation Guide
6a.
Warnings and Cautions before starting
Please read the manual fully and carefully before starting.
Retain the manual for future reference.
Any changes or modification to the wiring must be carried out
by competent, skilled and suitably qualified personnel only.
Solar panels create electrical energy when exposed to light.
Always treat solar panels as live and handle with care.
The
iSOLAR
PDP4 motor has internal capacitors that MUST be
allowed to discharge before handling. Allow 2 minutes for
stored energy to dissipate before handling the pump/motor.
Never open the cover while controller is connected to an
electrical supply. Disconnect and allow 2 minutes for the
internal electronics to discharge before opening the cover.
The controller is IP65 rated but should not be exposed to direct
sunlight. Install the controller where it has excellent ventilation
away from direct sunlight or exposure to adverse weather.
Solar arrays are an attractive earth path for lightning strikes.
Ensure the panels and controller are well earthed.
Helical rotor pumps must be used in a clean water, sediment-
free environment. Even a small amount of sand may lead to
screw wear, jamming or performance degradation.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
