Page 2
For technical questions, please call 1-888-866-5797.
57923
Specifications
Torque Range
40-250 ft-lb
Drive
Ǝ
Accuracy
±4% CW
Important Safety Information
WARNING Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in injury.
Save all warnings and instructions for future reference.
1. The warnings, cautions, and instructions
in this instruction manual cannot cover all
possible conditions and situations that may
occur. It must be understood by the operator
that common sense and caution are factors
which cannot be built into this product,
but must be supplied by the operator.
2. Wear ANSI-approved safety
goggles during use.
3. Do not use for loosening fasteners.
4. Use only within rated torque range.
5. Use as intended only. Do not
use as hammer or pry bar.
6. Do not use handle extension to increase
force. Do not use as a breaker bar.
7. Do not use a Torque Wrench that
has been dropped. Have it tested
before putting back into use.
8. Have the Torque Wrench calibrated and
serviced only by a qualified technician.
9. Inspect before every use; do not use
if damaged or if parts are loose.
10. Keep away from children.
11. Use only sockets with the correct
drive and rated to at least the
torque that will be applied to it.
Operating Instructions
Torque
Scale
Ratchet
Head
Rubber Grip
Lock & Unlock
Latch
CAUTION!
Wear ANSI-approved
safety goggles during use.
Note:
The Torque Scale is marked with
Foot Pounds. Scale below index line converts
Foot Pounds to Newton Meters. The following
instructions illustrate setting torque value properly
1. BEFORE EVERY USE, exercise Torque
Wrench. Open latch to unlock torque knob
(see step 5 on page 3)
, then perform
the following exercise three times:
a. Turn Handle to the right until maximum
torque setting is reached.
b. Turn Handle to the left until minimum
torque setting is reached.
