7.
The re-installation order should be as follows: OEM main spring, ICON 51200 expansion pack, OEM thick overload.
8.
Slip in the new spring pack in between the OEM main Spring and the OEM thick overload. The leaf springs will have to be clamped together in order to
get the locating pin to slide through and be tightened.
(Fig 4-1 / 4-2)
9.
Tighten one side of the c-clamps and threaded locating pins slightly, then the other side, back and forth till the springs are fully clamped together.
10.
Jack up the axle (re-install the entire leaf pack if you chose to remove the full spring pack) and guide the spring center pin in to the hole on the top of
the axle.
11.
Install new u-bolts, washers and nuts, tighten to Toyota specifications.
12.
Install shocks onto lower factory mount: Compress shock and insert bolt into the factory shock mount.
13.
Repeat steps 3-8 for the other side of the vehicle.
14.
Reinstall wheels and lower to the ground. Torque wheels and also Re check U-bolt torque at this time.
RE-TORQUE ALL NUTS, BOLTS AND LUGS AFTER 100 MILES AND PERIODICALLY THEREAFTER.
For Technical Assistance Call: 951.689.ICON
Icon Vehicle Dynamics LIMITED LIFETIME WARRANTY
Icon Vehicle Dynamics warrants to the original retail purchaser who owns the vehicle on which the product was originally installed.
Icon Vehicle Dynamics does not warrant the product for finish, alterations, modifications and/or installation contrary to Icon Vehicle
Dynamics instructions. Icon Vehicle Dynamics products are not designed, nor are they intended to be installed on vehicles used in race
applications, for racing purposes or for similar activities. (A “race” is defined as any contest between two or more vehicles, or a contest
of one or more vehicles against the clock, whether or not such contest is for a prize). This warranty does not include coverage for
police or taxi vehicles, race vehicles, or vehicles used for government or commercial purposes. Also excluded from this warranty are
sales outside of the United States of America and Canada.
Icon Vehicle Dynamics obligation under this warranty is limited to the repair or replacement, at Icon Vehicle Dynamics’ discretion, of the
defective product. Any and all costs of removal, installation or re-installation, freight charges and incidental or consequential damages
are expressly excluded from this warranty.
Items that are subject to wear are not considered defective when worn and are not covered.
Coil over take-apart shocks are considered a serviceable shock with a one year warranty on leakage only. Service seal kits are available
separately for future maintenance. We do not warranty any other product not directly manufactured by
Icon Vehicle Dynamics.
Icon Vehicle Dynamics components must be installed as a complete kit as shown in our current application guide. Any substitutions or
exemptions of required components will immediately void the warranty.
Some finish damage may happen to parts during shipping and is not covered under warranty.
This warranty is expressly in lieu of all other warranties expressed or implied. This warranty shall not apply to any product that has
been improperly installed, modified or customized subject to accident, negligence, abuse or misuse.
Figure 4 - 1
Figure 4 - 2
