5. Procedure to Rotate Display
1
2
3
4
5
6
Flow Meter & Transmitter
OP2
FTM
OP1
GPM
F
Flow Met
er & T
ransmi
tter
PO2
MTF
PO1
MPG
F
Flow
Meter &
Trans
mitter
2PO
MTF
1PO
MPG
Using an allen key loosen the 2 screws
located on either side of the display
Pull the screws | Do Not Remove
Flow Meter & Transmitter
OP2
FTM
OP1
GPM
OP2
FTM
OP1
GPM
Lift the Display
F
Flow Me
ter &
Transmitte
r
2PO
MTF
OP1
GPM
Rotate Display - 90 Degrees
Lower Display
Tighten the Allen screws | Snug Tight
Do Not Over-Tighten
6. Programming Models TKP | TKM
Step-5 For Programming 4-20mA Analog Output
TKM (4-20mA) and TKP with (RS 485 Option) Only
F
SET
(Together)
OPERATION
DISPLAY
STEPS
Home Screen
Press +
Step-1
Programming of Lock
Out Feature
Press
Step-2
Programming
Units of Flow
Press
Step-3
Coefficient of
Flow Volume
Press
Step-4
No Programming
Required
Program Range of Transmitter
TKM Model Only
Press
Step-5
TKP | TKM Series Only
Power On Flow Meter with DC Power
Display will Show
0 Totalizer (Top
RED
)
0 Flow Rate (Bottom
GREEN
)
Programming Lock Out Feature TKP | TKM Series
Lck = 10 (Unlocked) : Factory Default, IF
Lck
is Changed from the # 10 the Flow Meter
will be in Lockout Mode.
LCK 10 (Default)
To Unlock ensure
Lck
# is set to 10.
Programming Units of Flow TKP | TKM Series Only
Program Flow Units 0 | 1 | 2
Ut
= 0 : (LPM)
Ut
= 1 : (GPM)
(Default)
Ut
= 2 : {Kiloliter (KL)}
TKP | TKM Series Only
K-Factor : 0.1 - 999.9 (K-Factor is Factory Preset)
K-Factor Preset (Do Not Change
*Divide K Factor BY 3.8 TO CHANGE FROM GPM TO LPM
TKM (4-20mA) and TKP with (RS 485 Option) Only
Programming Analog Transmitter Range Output 4-20mA
Range : 0.1 - 999.9 4 mA = 0 20 mA = Entered Number.
TR 100 (Default)
4 mA = 0 GPM 20mA =100 GPM
This can be Change to Conform to Customers Application (Ex. Number Changed to 150)
(HOLD)
F
SET
CV
SV
LPM
FTM
Flow Meter & Transmitter
TKP
F
SET
CV
SV
LPM
FTM
Flow Meter & Transmitter
TKP
F
SET
CV
SV
LPM
FTM
Flow Meter & Transmitter
TKP
F
SET
CV
SV
LPM
FTM
Flow Meter & Transmitter
TKP
F
SET
CV
SV
LPM
FTM
Flow Meter & Transmitter
TKP
OP2
OP1
GPM
FTM
OP2
OP1
GPM
FTM
OP2
OP1
GPM
FTM
OP2
OP1
GPM
FTM
OP2
OP1
GPM
FTM
24V DC POWER ONLY
© Icon Process Controls Ltd. All Rights Reserved
04
for more information visit www.iconprocon.com
Multi
-
Function Paddle Wheel Flow Meter
TKS
|
TKP
|
TKM
ROTATOR
SERIES MANUAL
3
