ICON ProAudio Platform Nano Air, User Manual

Page: 57 / 115

57
Punch:
Punch is recording which overwrites existing audio or MIDI within a set punch area.T ap Punch to
XYZXYZXYZXYZXYZXYZ . This is a key workflow tool because of the time saved by combining
channeling and major edits. Without punch, subsequent takes must be individually edited into
the final channels. Using Punch keeps a production moving forward, which boosts creativity and
productivity.
Function Buttons:
The Function buttons, labeled F1 through F8 , are to be assigned custom user commands in
Cubase -> Device Setup.
Recommended custom user commands:
Input Bus
Input Gain
Input Phase
Direct Routing Assignment Mode:
( Shift + Page Up ) (Nuendo only, not Cubase)
Edit routing parameters with the Encoder Knobs on their respective channels. Channel up/down to
select direct routing slots 1 to 8. Activate a direct routing slot by turning the corresponding Encoder
Knob . Enable Summing Mode on parameter page 09/09 (reached with the Channel down button)
<<<<< Utilities >>>>>
Project Utilities:
Left = XYZXYZXYZ
Right = XYZXYZXYZ
Shift
+ Left = XYZXYZXYZ
Shift
+ Right = XYZXYZXYZ
Undo = Cubase Undo function
Redo = Cubase Redo function
Shift
+ Undo = Open Undo History
Save = Save Cubase project
Shift
+ Save = Save As: Save project with a new name
Revert = ?????
Marker:
XYZXYZXYZ
Add = XYZXYZXYZ
Prev = XYZXYZXYZ
Next = XYZXYZXYZ
Shift + Add = XYZXYZXYZ
Shift + Prev = XYZXYZXYZ
Shift + Next = XYZXYZXYZ