8
Rear Panel
1
4
2
5
3
1. Power supply connector
MobileU Live is USB-bus powered. If your computer does not supply sufficient
power, connect an ICON 5VDC power supply adapter to this jack. Or you may try
to use your smart phone power adapter with the connect cable type (Android).
Normally it should work and provide enough power to the device.
(
Note:
You can get the power adapter from ICON distributors/dealers near you)
(
Note:
External power adapter is needed if the MobileU Live is us as a standalone
unit without a Mac or PC)
2. Smart Device I/O (Digital - Type C & Analog - 3.5mm TRRS)
These ports allow you to connect your smart device and your Mac/PC
simultaneously so you may process the audio signal wih your Mac/PC before
delivering signal to the smart device for live streaming application.
Digital - Type C jack for connecting directly to the digital jack of the smart
device
Analog - TRRS stereo jack for connecting directly to smart device’s audio I/O
3. MIDI I/O connectors
MIDI input and output on standard 5-pin DIN connectors.
4. USB 2.0 connector
Connect it with the provided USB cable to your Mac/PC/iOS device camera kit’s
USB connector. Your Mac/PC must have a USB2.0 connector in order to run the
full speed of MobileU Live.
5. Line outputs 1/2
These are balanced analog outputs on standard 1/4" TS connectors
at +4dB line level. These outputs will support standard stereo, as well as 2 mono.
