12
10
25
25
7
4
11
10. Untie and discard the wire tie on the Main Wire
(25). Then, route the Main Wire upward through
the Handlebar (4) as shown.
While a second person holds the Console (7)
near the Handlebar (4), connect the wire on the
Console to the Main Wire (25).
Tip: The wire
connectors should slide together easily and
snap into place with an audible click. If they
do not, turn one connector and try again.
Then, insert the excess wire into the
Handlebar (4).
11.
Tip: Avoid pinching the Main Wire (25).
Attach
the Console (7) to the Handlebar (4) with four
M4 x 16mm Screws (2);
start all the Screws,
and then tighten them.
2
7
4
Avoid pinching the
Main Wire (25)
Summary of Contents for Pro-Form Pro C10U
Page 4: ...4...
