background image

8

•  To hire an authorized service technician to 

assemble this product, call 1-800-445-2480.

•  Assembly requires two persons.

•  Place all parts in a cleared area and remove the 

packing materials. Do not dispose of the packing 

materials until you complete all assembly steps.

•  Left parts are marked “L” or “Left” and right parts 

are marked “R” or “Right.”

•  To identify small parts, see page 7.

•  In addition to the included tool(s), assembly 

requires the following tools:

one Phillips screwdriver 

one adjustable wrench 

Assembly may be easier if you have your own set 

of wrenches. To avoid damaging parts, do not use 

power tools.

ASSEMBLY

1

2.  With the help of a second person, place some of 

the packing materials (not shown) under the rear 

of the Frame (1). Have the second person hold 

the Frame to prevent it from tipping while you 

complete this step. 

  Identify the two Rear Stabilizers (5).

  Attach one of the Rear Stabilizers (5) to the 

Frame (1) with three M10 x 20mm Screws (144);  

start all the Screws, and then tighten them. 

  Attach the other Rear Stabilizer (5) in the 

same way.

  Then, remove the packing materials from under 

the Frame (1).

2

144

144

5

1

5

1.  

Go to my.proform.com on your computer and 

register your product.

  •   documents your ownership
  •   activates your warranty
  •   ensures priority customer support if assistance 

is ever needed

   Note: If you do not have internet access, call 

Customer Care (see the front cover of this 

manual) and register your product.

Summary of Contents for PRO-FORM PRO 16.9





































Reviews: