ICON Health & Fitness PRO-FORM PREMIER 1300 User Manual Download Page 30

Page: 30 / 40

SYMPTOM: The walking belt slows when walked on

Use only a surge suppressor that meets all of the

specifications described on page 17.

b. If the walking belt is overtightened, treadmill

performance may decrease and the walking belt

may become damaged. Remove the key and

UNPLUG THE POWER CORD. Using the hex key,

turn both idler roller screws counterclockwise, 1/4

of a turn. When the walking belt is properly tight-

ened, you should be able to lift each edge of the

walking belt 2 to 3 in. (5 to 7 cm) off the walking

platform. Be careful to keep the walking belt

centered. Then, plug in the power cord, insert the

key, and walk on the treadmill for a few minutes.

Repeat until the walking belt is properly tightened.

Your treadmill features a walking belt coated with

high-performance lubricant. IMPORTANT: Never

apply silicone spray or other substances to

the walking belt or the walking platform unless

instructed to do so by an authorized service

representative. Such substances may deterio-

rate the walking belt and cause excessive wear.

If you suspect that the walking belt needs more

lubricant, see the front cover of this manual.

d. If the walking belt still slows when walked on, see

the front cover of this manual.

SYMPTOM: The walking belt is off-center or slips

when walked on

a. If the walking belt is off-center, first remove the

key and UNPLUG THE POWER CORD. If the

walking belt has shifted to the left, use the hex

key to turn the left idler roller screw clockwise 1/2

of a turn; if the walking belt has shifted to the

right, turn the left idler roller screw counterclock-

wise 1/2 of a turn. Be careful not to overtighten the

walking belt. Then, plug in the power cord, insert

the key, and walk on the treadmill for a few min-

utes. Repeat until the walking belt is centered.

b. If the walking belt slips when walked on, first

remove the key and UNPLUG THE POWER

CORD. Using the hex key, turn both idler roller

screws clockwise, 1/4 of a turn. When the walk-

ing belt is correctly tightened, you should be able

to lift each edge of the walking belt 2 to 3 in. (5 to

7 cm) off the walking platform. Be careful to keep

the walking belt centered. Then, plug in the power

cord, insert the key, and walk on the treadmill for a

few minutes. Repeat until the walking belt is prop-

erly tightened.

Idler Roller Screws

2–3 in.

Summary of Contents for PRO-FORM PREMIER 1300









































Search results

Summary of Contents for PRO-FORM PREMIER 1300

Reviews:

Related manuals for PRO-FORM PREMIER 1300

Brands by name

Popular brands

ICON Health & Fitness PRO-FORM PREMIER 1300, User Manual

Search results

Summary of Contents for PRO-FORM PREMIER 1300

Reviews:

Related manuals for PRO-FORM PREMIER 1300

Brands by name

Popular brands