13
9
5
86
87
10
10.
IMPORTANT: To avoid damaging the Pulse
Crossbar Bottom (95), do not use power
tools and do not overtighten the #10 x 3/4"
Screws (9).
Attach the Pulse Crossbar Bottom (95) to the
Handrails (86, 87) with four #10 x 3/4" Screws
(9) and four #10 Star Washers (5);
start all four
Screws, and then tighten them.
95
11
92
F
87
23
79
85
23
23
11. Identify the Right Handrail Cover (92), and set
it on the Right Handrail (87). Start two #8 x 3/4"
Truss Head Screws (23) into the bottom of the
Right Handrail Cover;
do not fully tighten the
Truss Head Screws.
Next, slide the Right Handrail Cover (92) for-
ward until it rests against the console assembly
(F). Then, tighten the two #8 x 3/4" Truss Head
Screws (23);
do not overtighten the Truss
Head Screws.
Then, attach the Right Bottom Handrail Cover
(84) with three #8 x 3/4" Truss Head Screws
(23);
start all three Truss Head Screws, and
then tighten them.
Attach the Left Handrail Cover (79) and the
Left Bottom Handrail Cover (85) in the same
way.
84
23
9
5
