9
6
6. Orient the Handlebar (7) as shown.
While a second person holds the Handlebar (7)
near the Handlebar Post (6), connect the Upper
Wire (68) to the Lower Wire (69).
Insert the wires into the Handlebar Post (6).
Tip: Avoid pinching the wires.
Attach the
Handlebar (7) to the Handlebar Post (6) with
a 5/16" x 3/4" Screw (92) and a 5/16" x 2 1/4"
Screw (81).
Avoid pinching
the wires
69
68
7
81
92
6
7
8
94
7
7. Orient the Handlebar Cover (8) as shown and
hold it near the Handlebar (7).
Connect the wire on the receiver (not shown) to
the Extension Wire (101). Insert the excess wire
into the Handlebar (7).
Tip: Avoid pinching the Extension Wire
(101).
Insert a #8 x 5/8" Screw (94) upward
into the front hole in the Handlebar (7). Set the
Handlebar Cover (8) on the Handlebar, and
tighten the Screw into the Handlebar Cover.
Next, insert a #8 x 5/8" Screw (94) into the rear
hole in the Handlebar (7) and tighten the Screw
into the Handlebar Cover (8).
63
61
8. Identify the Left Pedal (61), which is marked with
an “L.”
Using an adjustable wrench,
firmly tighten
the
Left Pedal (61)
counterclockwise
into the Left
Crank Arm (63).
Tighten the Right Pedal (not shown)
clockwise
into the Right Crank Arm (not shown).
8
Rear
Avoid pinching
the wire
Front
94
101
Wire
