13
J
J
I
84
83
74
74
8
8
9.
Set the console assembly (K) face down on
a soft surface to avoid scratching the console
assembly.
Remove and discard the four indicated screws
(L). Then, remove the Pulse Crossbar (80).
Next, identify the Left and Right Trays (94, 101).
Attach the Trays to the console assembly (K)
with eight #8 x 1/2" Screws (11).
Do not over-
tighten the Screws.
K
80
L
9
L
8
2
2
L
91
11
101
94
11
11
8. Attach the two Handrails (74) to the Right and
Left Uprights (84, 91) with two 5/16" x 2" Screws
(2) and two 5/16" Star Washers (8);
do not
fully tighten the Screws yet. Be careful not
to pinch the Upright Wire (83) or the fan wire
(H) on the right side. Position the wire in the
notch (I) as shown.
Then, remove and discard the two indicated
screws (J).
H
Summary of Contents for NTL19117.1
Page 5: ...5...
