12
9.
Set the console assembly (H) face down on
a soft surface to avoid scratching the console
assembly.
Remove and discard the four indicated screws
(I). Then, remove the Crossbar (80).
Next, identify the Left and Right Trays (94, 101).
Attach the Trays to the console assembly (H)
with eight #8 x 1/2" Screws (11).
Do not over-
tighten the Screws.
H
80
I
9
I
I
11
101
94
11
11
10.
IMPORTANT: To avoid damaging the Crossbar
(80), do not use power tools, and do not
overtighten the #10 x 3/4" Screws (6) or the
5/16" x 2" Screws (2).
Orient the Crossbar (80) as shown. Attach the
Crossbar with two 5/16" x 2" Screws (2), two
5/16" Star Washers (8), and two #10 x 3/4"
Screws (6);
start all four Screws, and then
tighten them.
Then, tighten the other two 5/16" x 2"
Screws (2).
80
10
8
8
2
2
2
2
6
6
