11
5. Carefully slide the Upright Crossbar (76)
between the left and right Uprights (84). Attach
the Upright Crossbar with four 5/16" x 3/4"
Screws (1); start all four Screws, and then
tighten them.
5
84
1
76
84
1
6. Hold the Tray (79) near the right Upright (84).
Wrap the tie in the hole in the side of the right
Upright around the end of the fan wire (B). Next,
pull the fan wire into the hole and out of the top
of the right Upright. Then, remove the tie.
Identify the #8 x 3/4" Screws (5). IMPORTANT:
Do not confuse the #8 x 3/4" Screws (5) with
the #8 x 3/4" Truss Head Screws (24). The #8
x 3/4" Truss Head Screws have flatter heads.
Attach the Tray (79) to the Upright Crossbar
(76) with four #8 x 3/4" Screws (5); start all four
Screws, and then tighten them.
6
5
84
B
76
5
79
Hole
Tie
Summary of Contents for NTL14114.0
Page 5: ...5...
