13
41
54
53
52
G
11.
Note: You can attach your own saddle if
desired
.
See inset drawing a.
Tip the Saddle (54) to
one side and slide one of the rails (G) as far as
possible between the Lower Saddle Clamp (52)
and the Upper Saddle Clamp (53). If necessary,
further loosen the M8 Saddle Screw (41).
See inset drawing b.
Tip the Saddle (54)
downward as shown and slide the other rail (G)
between the Saddle Clamps (52, 53).
Make
sure that both rails are in the grooves in the
Saddle Clamps and that the Saddle is straight
and level.
Then, firmly tighten the Saddle
Screw (41).
11
54
54
a
b
53
52
52, 53
G
G
41
41
56
12.
Note: You can attach your own pedals if
desired.
Identify the right Pedal (56). Using your fingers,
turn the Right Pedal about halfway into the Right
Crank Arm (19). Then, use the included wrench
to fully tighten the Right Pedal.
Repeat this step with the Left Pedal (not
shown). IMPORTANT: You must turn the Left
Pedal COUNTERCLOCKWISE to attach it.
12
19
Summary of Contents for NTEX02121.5
Page 4: ...4 STANDARD SERVICE PLANS...