background image

29

 HOW TO FOLD THE TREADMILL

To avoid damaging the treadmill, adjust the incline 

to zero before you fold the treadmill. Then, remove 

the key and unplug the power cord. CAUTION: You 

must be able to safely lift 45 lbs. (20 kg) to raise, 

lower, or move the treadmill.

1.    Hold the metal frame (A) firmly in the location 

shown by the arrow below. CAUTION: Do not hold 

the frame by the plastic foot rails. Bend your 

legs and keep your back straight.

2.   Raise the frame (A) until the storage latch (B) locks 

in the storage position. CAUTION: Make sure that 

the storage latch locks.

   To protect the floor or carpet, place a mat under 

the treadmill. Keep the treadmill out of direct 

sunlight. Do not leave the treadmill in the storage 

position in temperatures above 85°F (30°C).

HOW TO MOVE THE TREADMILL

Before moving the treadmill, fold it as described at the 

left. CAUTION: Make sure that the storage latch is 

in the locked position. Moving the treadmill may 

require two people.

1.    Hold the frame (A) and one of the handrails (C), 

and place one foot against a wheel (D).

2.     Pull back on the handrail until the treadmill will roll 

on the wheels, and carefully move it to the desired 

location. CAUTION: Do not move the tread-

mill without tipping it back, do not pull on the 

frame, and do not move the treadmill over an 

uneven surface.

HOW TO LOWER THE TREADMILL FOR USE

1.     Push the upper end of the 

frame forward, and gently 

press the upper part of 

the storage latch with your 

foot at the same time.

2.     While pressing the storage 

latch with your foot, pull 

the upper end of the frame 

toward yourself.

3.   Step back and let the 

frame lower to the floor.

A

1

B

2

A

C

A

D

1

1

2

 HOW TO FOLD AND MOVE THE TREADMILL 

Summary of Contents for NordicTrack S50









































Reviews: