background image

19

HOW TO SET UP THE CONSOLE 

Before using the treadmill for the first time, set up the 

console. 

1.  Connect to your wireless network.

   To access the internet, download iFit workouts, 

and use several other features of the console, the 

console must be connected to a wireless network. 

Follow the prompts on the screen to connect the 

console to your wireless network.

2.  Customize settings.

   Fill in the form on the screen to set the console to 

display the desired unit of measurement and your 

time zone. Note: If you need to change these set-

tings later, see HOW TO USE THE EQUIPMENT 

SETTINGS SECTION on page 25.

3.  Log into or create an iFit account.

   Provide your email address, and follow the prompts 

on the screen to sign up for or log into your iFit 

account.

4.  Tour the console.

   The first time you turn on the treadmill, dialogue 

boxes on the screen will guide you through the 

features of the console. 

5.  Check for firmware updates.

   First, touch your name in the upper-left corner and 

touch the Settings button. Next, select the main-

tenance section. Then, touch the Update button 

to check for firmware updates using your wireless 

network. See HOW TO USE THE MAINTENANCE 

SECTION on page 25 for more information.

6.  Calibrate the incline system.

   First, touch your name in the upper-left corner. 

Next, select the settings main menu. Then, select 

the maintenance section, touch the Calibrate 

Incline button, and then touch the Begin button to 

calibrate the incline system. See step 4 on page 26 

for more information.

The console is now ready for you to begin working out. 

The following pages explain the various workouts and 

other features that the console offers.

To use the manual mode, see page 20. To use a 

map workout, see page 22. To use a draw your own 

map workout, see page 22. To use a distance or 

time workout, see page 23. 

To use the workout settings section, see page 24. 

To use the equipment settings section, see page 25. 

To use the maintenance section, see page 25. To 

use the wireless network mode, see page 26. To 

use the sound system, see page 27. To use the 

cushions, see page 28. 

IMPORTANT: If there are sheets of plastic on the 

console, remove the plastic. To prevent damage 

to the walking platform, wear clean athletic shoes 

while using the treadmill. The first time you use 

the treadmill, observe the alignment of the walking 

belt, and center the walking belt if necessary (see 

page 32).

Summary of Contents for NordicTrack S50









































Reviews: