10
8
9
24
26
37, 58
17
25
G
3
27
4
9. Orient the Console Cover (3) as shown, and
slide it onto the Upright (27).
Tip: Avoid pinching the Main Wire Harness
(25).
Insert the Pivot Bracket (11) on the
Handlebar (4) into the Upright (27).
Attach the Pivot Bracket (11) with two
M8 x 58mm Bolts (24) and two M8 Locknuts
(17).
Make sure that the Locknuts are in the
hexagonal holes (G).
Tip: If necessary, rotate the Handlebar (4) to
a different angle so that there is sufficient
space to tighten the M8 x 58mm Bolts (24).
8. Orient the Shield Cover (26) as shown, and
press it onto the Left and Right Shields (37, 58).
Avoid pinching
the Main Wire
Harness (25)
11
