9
23
21
22
14
19
6
118
6. Identify the Strap (21) on the Right Pedal
Arm (15). Route the Strap under the Roller (89);
make sure that the Strap is not twisted.
Make sure that the Glide Belt (19) on the
Right Pedal Arm (15) is resting on top of the
Roller (89) and that the Strap (21) is routed
under the Roller.
Tip: It may be helpful to have a second
person press downward on the Right Pedal
Arm (15) while you perform the following
action.
Make sure to orient the Strap Clamp (23)
as shown in the inset drawing. Attach the
Strap (21) to the Strap Bracket (22) on the Right
Pedal Arm (15) with three M6 x 20mm Screws
(118) and a Strap Clamp; start all the Screws,
and then tighten them.
Repeat this step for the Left Pedal Arm (14).
19
89
23
21
15
89
143
143
7
24
25
14
7. Identify the Left and Right Rear Belt Covers
(24, 25), and then attach them to the Left Pedal
Arm (14) with five M4 x 16mm Screws (143);
start all the Screws, and then tighten them.
Repeat this step on the other side of the
elliptical.
