background image

31

   Note: If a passcode is enabled, the console will 

regularly ask for you to enter the passcode. The 

console will remain locked until the correct pass-

code is entered. 

IMPORTANT: If you forget your 

passcode, enter the following master passcode 

to unlock the console: 1985.

10. Start the introductory slideshow.

   To view an introductory slideshow about the 

console displays, touch the Start Intro Slideshow 

button.

11. Enable or disable street view.

   During some workouts, the screen may show a 

map. To enable or disable the street view feature of 

the maps, first touch the Street View button. Next, 

touch the Enable checkbox or the Disable check-

box. Then, touch the back button on the screen.

12. Select a time zone.

   To select a time zone, touch the Timezone button 

and select the desired time zone. Then, touch the 

back button on the screen.

13. Select an update time.

   To select a time for automatic console updates, 

touch the Update Time button and select the 

desired time. Then, touch the back button on the 

screen.

   When you select an update time, you must also 

enable automatic console updates (see step 4).

   IMPORTANT: You must still unplug the power 

cord after using your elliptical. Set the update 

time for a time when you normally use your 

elliptical and will be available to unplug the 

power cord after an update.

 14. Select the unit of measurement.

   Touch the US/Metric button to view the selected 

unit of measurement. Next, touch the checkbox for 

the desired unit of measurement. Then, touch the 

back button on the screen.

15. Exit the equipment settings mode.

   To exit the equipment settings mode, press the 

back button on the console or touch the back but-

ton on the screen.

Summary of Contents for NordicTrack C9.5













































Reviews: