24
During the
workout, the
proiles on the
speed and
incline tabs
will show your
progress. The
lashing seg
-
ment of the proile represents the current segment
of the workout. The height of the lashing segment
indicates the speed or incline setting for the current
segment. At the end of each segment, a series of
tones will sound and the next segment of the pro-
ile will begin to lash. If a different speed and/or
incline setting is programmed for the next segment,
the speed and/or incline setting will lash in the dis
-
play to alert you and the treadmill will automatically
adjust to the new speed and/or incline setting.
The workout will continue in this way until the last
segment of the proile lashes in the display and
the last segment ends. The walking belt will then
slow to a stop.
Note: The calorie goal is an estimate of the
number of calories that you will burn during
the workout. The actual number of calories
that you burn will depend on various factors
such as your weight. In addition, if you manu-
ally change the speed or incline of the treadmill
during the workout, the number of calories you
burn will be affected.
If the speed or incline setting is too high or too low
at any time during the workout, you can manu-
ally override the setting by pressing the Speed or
Incline buttons;
however, when the next segment
of the workout begins, the treadmill will auto-
matically adjust to the speed and incline set-
tings for the next segment.
To stop the workout at any time, press the Stop
button. The time will begin to lash in the display.
To resume the workout, press the Start button or
the Speed increase button. The walking belt will
begin to move at 2 Km/H. When the next segment
of the workout begins, the treadmill will automati-
cally adjust to the speed and incline settings for the
next segment.
4.
Follow your progress with the displays.
See step 5 on page 22. If you select an onboard
workout, the display will show the time remaining
instead of the elapsed time.
5. Measure your heart rate if desired.
See step 6 on page 23.
6. Turn on the fan if desired.
See step 7 on page 23.
7.
When you are inished exercising, remove the
key from the console.
See step 8 on page 23.
HOW TO USE A SET-A-GOAL WORKOUT
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page 21.
2. Set a calories, distance, or time goal.
First, press the Set A Goal button. Next, press the
increase and decrease buttons next to the Enter
button until the name of the desired goal appears in
the display. Press Enter.
Then, press the increase and decrease buttons
next to the Enter button to set the desired goal.
3. Start the workout.
Press the Start button to start the workout. A
moment after you press the button, the walking belt
will begin to move. Hold the handrails and begin
walking.
The workout will function in the same way as the
manual mode (see pages 21 to 23).
Current Segment
