6
4. Tilt the chair back into the upright position.
See the inset drawing. Remove the rubber bands
from the screws in the Base (1). Make sure the Arm
Brackets (31) inside the tubes on the Base are
pressed against the indicated sides of the tubes.
Align the posts on the Right Armrest (5) with the
tubes on the Base (1). Slide the Right Armrest onto
the Base.
Make sure the posts go inside the
tubes on the Base. Note: You may need to flex
the posts away from the Right Side Shield (7) to
assemble it past the Bracket Screws in the Base.
5. See the inset drawing. Remove the rubber bands
from the screws. Make sure the Arm Brackets (31)
inside the tubes on the left side of the Base (1) are
pressed against the indicated sides of the tubes.
Align the posts on the Left Armrest (6) with the tubes
on the Base (1). Slide the Left Armrest onto the
Base. You may need to flex the posts away from the
Left Side Shield (8) to assemble it past the Bracket
Screws (32) in the Base.
Attach the Pillow (13) to the fastener strip.
1
5
7
Posts
4
1
31
31
Top View
1
31
31
1
8
6
32
13
5
