24
IMPORTANT: Due to the size and weight of the
treadmill, moving it requires two or three persons.
To avoid damaging the leveling feet, do not move
the treadmill by sliding it.
Before moving the treadmill, plug in the power cord,
insert the key into the console, and raise the incline
to the highest position (see pages 14 to 16). Next,
remove the key and unplug the power cord. Then,
follow the steps below.
1. Hold the handle firmly. CAUTION: To decrease
the possibility of injury or of damage to the
treadmill, do not lift the treadmill by the hand-
rail. Raise the handle (A) until the treadmill will roll
on the wheels (B). Then, carefully roll the treadmill
to the desired location and lower it to the level posi-
tion. CAUTION: To reduce the risk of injury, use
extreme caution while moving the treadmill. Do
not attempt to move the treadmill over uneven
surfaces.
2. When the treadmill is in the location where it will
be used, make sure that the leveling feet (C)
rest firmly on the floor. If the treadmill rocks even
slightly, loosen the nut on a Leveling Foot, turn the
Leveling Foot clockwise or counterclockwise until
the rocking motion is eliminated, and then tighten
the nut.
A
B
1
C
2
HOW TO MOVE THE TREADMILL
