Page 5
When unpacking you may find it
easier to remove the unit if you follow
this procedure:
1. Turn the box “upside down” with
the “flaps” open.
2. Then to lift the cardboard box off.
3. Remove the bottom packing first.
4. Turn the unit the right way up and
remove the top packing.
Please be careful not to damage the
small “tape monitor” switch on the
front panel
If all four feet do not sit level, small adjustments may be
made by adjusting one or more of the screw feet until
the unit sits level.
Sometimes during transit the chassis may get slightly
twisted. To rectify this, place the unit on a hard, level
surface and push down very firmly on the two opposite
corners that are not level. This will straighten the
chassis.
(please keep this information for future use).