15
Figure 3: 45° oriented conical bracket
To install the optional bracket, remove the 4 nuts and take out the conical part.
Figure 4: TMS-SA without bracket
Replace the conical part by the steerable bracket as shown on
Figure 5. Please make sure the marks coincide.
Figure 5: steerable bracket
The nuts tightening torque must be 22 Nm.
5.1.2.2
Installing the pole support
–
Standard 45° mounting bracket
Ensure that the support plate is well parallel to the road thanks to the alignment tool integrated in the
equipment (for easily aligning the bracket). The spirit level enables you to check that post is
vertical/parallel to the ground.