9
4 INSTALLATION GUIDE
4.1
G
ENERAL
•
Installation’ height: min. 3.5 m - max. 4.5
m
•
Offset
between pole and the roadside
(O)
:
max. 2 m
•
Distance
between pole and the
stop-line
(D)
: min. 2 m
4.2
A
SSEMBLY AND MOUNTING
Figure 6: bracket elements
1.
Set the appropriate parameter values with the encoders
and place the sticker!
2.
Place the upper right screw to assemble bracket n°2 with
bracket n° 1, with the upper right screw, allowing bracket nr
2 to rotate.
Figure 7: bracket assembly
3.
Fix the radar on bracket n°2 (see Figure 6).
4.
Once you are behind the radar, place the second screw in
the lower right hole. Don’t tighten it completely. The radar
bracket n°1 must be parallel to the approaching lane. See
orange arrow example on Figure 8.
Figure 8:
bracket
position,
parallel to
the traffic
Bracket n°1
TMA-122
Bracket n°2
Pavement
Pavement
