36
CONNECTING BACNET
Changing BACnet MS/TP Network Address (cont)
10 To change the BACnet base address of the CM from the default value of 80 to a new (example)
address of 27 type “BA=27” at the iCOMM> command prompt in the telnet window and press the
enter key. If entered correctly the command window (see Figure 25) will include the following text:
Welcome to iCOMM Communications Module Stand Alone Mode Setup
Type: H at the prompt at any time for a list of commands.
iCOMM>BA=27
BACnet Base Address = 27
11 The address is now changed. Type Q and press the enter key to exit the telnet setup screen.
Figure 25
