4 - 7
4
5
6
7
11
12
13
14
LEDR
LEDT
LIGT
AFON
DUSE
MCON
CSFT
SPON
Outputs RX LED control signal.
Low: Lights ON.
Outputs TX LED control signal.
Low: Lights ON.
Outputs back light LED control signal.
Low: Back light is ON.
Outputs audio control signal.
Low: Outputs audio signals from
speaker.
• Outputs CTCSS/DTCS switching
signal when transmitting.
High: Selected DTCS.
• Outputs Min. VR switching signal
when receiving.
Low: Select Min VR.
NOTE:
Audio signals are prior to
transmitting.
Outputs microphone select signal.
High: While the internal microphone
is used.
Outputs shift signal for reference
oscillator’s frequency.
Outputs the internal speaker control
signal.
High: The inter nal speaker is
selected.
Pin Port
Description
number name
4-6-3 EXPANDER IC (FRONT UNIT; IC410)
4
5
6
7
11
12
13
14
R5C
T5C
LIGT
AFON
MUT2
MUT1
PMFM
TMUT
Outputs the R5 regulator (Q22)
control signal.
Low: While receiving.
Outputs the T5 regulator (Q21) control
signal.
Low: While transmitting.
Outputs the S5 regulator (Q23–Q25)
control signal.
Low: While the S5 regulator outputs
5 V voltage.
Outputs audio control signal.
Low: Outputs audio signals from
speaker.
Outputs the analog switch (IC13,
pins 5, 6) control signal to control the
scrambler unit.
High: While the scrambler function is
ON.
Low: While the microphone mute or
AF mute is ON.
Outputs the analog switch (IC13, pins
12, 13) control signal to control the
scrambler unit.
High: While the scrambler function is
ON.
Low: While the microphone mute or
AF mute is ON.
Outputs the FM/PM modulation
switching signal to the FM/PM switch
(IC11, pin 5).
High: PM is selected.
Outputs the transmitting mute switch
control signal to the mute switch (D25).
High: While muting.
Pin Port
Description
number name
4-6-5 EXPANDER IC (MAIN UNIT; IC12)
11
14
15
22
23
BAL
T2
T1
LVA
REF
Outputs the modulation balance level
control signal. The signal is applied to
the buffer amplifier (IC16, pin 2).
• Outputs the bandpass filter tuning
signal. The output signal is applied
to the bandpass filters (D9, D10).
• Outputs the TX power control signal.
The output signal is applied to the
APC amplifier (IC2, pin 1).
Outputs the bandpass filter tuning
signal. The output signal is applied to
the bandpass filters (D4, D8).
Outputs the PLL lock voltage control
signal. The output signal is applied to
the buffer amplifier (IC16, pin 5).
Outputs the reference oscillator
correcting voltage. The voltage is applied
to the buffer amplifier (IC16, pin 3).
Pin Port
Description
number name
4-6-4 D/A CONVERTER IC (MAIN UNIT; IC6)
Summary of Contents for VHF IC-F50
Page 1: ...SERVICE MANUAL ADDENDUM CONTENTS PARTS LIST 1 BOARD LAYOUTS 6 VOLTAGE DIAGRAM 8 Feb 2008...
Page 10: ...SERVICE MANUAL ADDENDUM CONTENTS PARTS LIST 1 BOARD LAYOUTS 6 VOLTAGE DIAGRAM 8 Aug 2007...
Page 20: ...S 1407IZ C1 e Dec 2006 VHF TRANSCEVER...
Page 57: ...1 1 32 Kamiminami Hirano ku Osaka 547 0003 Japan S 14007IZ C1 e 2003 2006 Icom Inc...