Icom VHF IC-F50 Insrtuction Manual Download

Page: 62 / 64

OPTIONS

BATTERY PACK/CASE

• BP-226

battery

case

Battery case for 5 × AA (LR6) alkaline cells. The BP-226 meets IPX4 re

quirements for splash resistance*. When it is connected, the transceiver

corresponds to IPX4.

• BP-227/BP-227FM

ion

battery

packs

Voltage

: 7.4 V

Capacity : 1850 mAh (minimum)/1950 mAh (typical)

BP-227/BP-227FM

must be charged with the optional

BC-152N/BC-190/

BC-119N/BC-121N

CHARGERS

• BC-152N

desktop

charger

+ BC-147S

adapter

Used for regular charging of the battery pack. The AC adapter, BC-147S,

must be purchased separately.

Charging time: Approximately 10 hours for BP-227/FM.

• BC-190

desktop

charger

+ BC-145S

adapter

Used for rapid charging of the battery pack. The AC adapter, BC-145, is

not supplied with some versions.

Charging time: Approximately 2.5 to 4.25 hours for BP-227

/FM.

• BC-119N

desktop

charger

+ AD-100

charger

adapter

+ BC-145S

adapter

Used for rapid charging of battery packs. The AC adapter, BC-145, is not

supplied with some versions.

Charging time: Approximately 2 to 2.5 hours for BP-227/FM.

• BC-121N

multi

charger

+ AD-100

charger

adapter

(6 pcs.)

+ BC-157

adapter

Used for rapid charging of up to 6 battery packs (six AD-100’s are re

quired) simultaneously. An AC adapter should be purchased separately.

Charging time: Approximately 2 to 2.5 hours for BP-227/FM.

DC CABLES

• CP-23L

cigarette

lighter

cable

Allows charging of the battery pack through a 12 V cigarette lighter sock

et. (For BC-119N)

• OPC-515L/OPC-656

power

cables

Allows charging of the battery pack using a 13.8 V power source instead

of the AC adapter.

OPC-515L : For BC-119N

OPC-656 : For BC-121N

Summary of Contents for VHF IC-F50

































































Search results

Summary of Contents for VHF IC-F50

Reviews:

Related manuals for VHF IC-F50

Brands by name

Popular brands

Icom VHF IC-F50, Insrtuction Manual

Search results

Summary of Contents for VHF IC-F50

Reviews:

Related manuals for VHF IC-F50

Brands by name

Popular brands