6-9
ADJUSTMENT
ADJUSTMENT
CONDITION
OPERATION
ADJUSTMENT
ITEM/POINT
VALUE
ANALOG
DEVIATION
-Preparation-
1
–
Set the item
[TX Mode]
to "1."
[TX Mode]
"1"
2
–
1) Connect the modulation analyzer to the TX
antenna connector, through an attenuator,
and then set to:
HPF:
OFF
LPF:
20 kHz
De-emphasis:
OFF
Detector:
(P-P)/2
2) Connect an audio generator to the MIC line,
through the JIG cable, and then set to:
Modulation: 1015 Hz
Level:
40 mV rms
Waveform:
Sine wave
–
–
-Adjust-
(Wide)
3 • Channel: 1-21
• Transmitting
1) Adjust the deviation using [
←
] / [
→
] keys of
the PC’s keyboard.
2)
Push the [ENTER] key to store the adjust
value.
[MOD (Wide)]
±4.10 ±0.05 kHz
(Middle)**
4 • Channel: 1-22
[Wide Band Width]
: "Middle"
(see the page 6-5)
• Transmitting
[MOD (Middle)]
±3.20 ±0.05 kHz
(Narrow)
5 • Channel:
1-23
[L]
1-22 [H], [350 MHz]
• Transmitting
[MOD (Narrow)]
±2.10 ±0.05 kHz
CTCSS/DTCS
DEVIATION
-Preparation-
1
–
Set the item
[TX Mode]
to "3."
[TX Mode]
"3"
-Adjust-
(Wide)
2 • Channel:
1-24
[L]
1-23 [H], [350 MHz]
• Transmitting
1) Adjust the deviation using [
←
] / [
→
] keys of
the PC’s keyboard.
2) Push the [ENTER] key to store the adjust
value.
[CTCSS (Wide)]
±0.70 ±0.02 kHz
(Narrow)
3 • Channel:
1-25
[L]
1-24 [H], [350 MHz]
• Transmitting
[CTCSS
(Narrow)]
±0.35 ±0.02 kHz
**: For only [EUR], [DPM] versions. [L]= Low band, [H]=High band, [350 MHz]=350 MHz band.
6-4 RECEIVE ADJUSTMENT
1) Select an adjustment item using cursor or [
↑
] / [
↓
] keys of the PC’s keyboard.
2) Set or modify the adjustment value as speci
fi
ed using [
←
] / [
→
] keys of the PC’s keyboard, and then push the [ENTER] key.
ADJUSTMENT
ADJUSTMENT
CONDITION
OPERATION
ADJUSTMENT
ITEM/POINT
VALUE
RECEIVE
SENSITIVITY
-Preparation-
1
–
Set the item
[RX Mode]
to "1."
[RX Mode]
"1"
2
–
Connect the SSG to the RX antenna connec-
tor, and then set to:
Level
†
:
+20 dB
μ
(–87 dBm)
Modulation: 1 kHz
Deviation:
±3.5 kHz
–
–
-Adjustment-
(Band center)
3 • Channel:
1-26 [L]
1-25 [H], [350 MHz]
• Receiving
1) Set the SSG to:
Frequency:
435.000 MHz [L]
450.100 MHz [H]
375.000 MHz [350 MHz]
2) Select the item
[BPF C ALL]
, and then
push the [ENTER] key.
[BPF C ALL]
(Automatic
adjustment)
-Adjustment-
(Band low)
For only [L]
and [350 MHz]
4 • Channel:
1-27 [L]
1-26 [350 MHz]
• Receiving
1) Set the SSG to:
Frequency:
400.100 MHz [L]
350.100 MHz [350 MHz]
2) Select the item
[BPF L ALL]
, and then
push the [ENTER] key.
[BPF L ALL]
-Adjustment-
(Band high)
5 • Channel:
1-28 [L]
1-26 [H]
1-27 [350 MHz]
• Receiving
1) Set the SSG to:
Frequency:
469.900 MHz [L]
519.900 MHz [H]
399.900 MHz [350 MHz]
2) Select the item
[BPF H ALL]
, and then
push the [ENTER] key.
[BPF H ALL]
[L]= Low band, [H]=High band, [350 MHz]=350 MHz band.
†
: The output level of the standard signal generator (SSG) is indicated as the SSG’s open circuit.
6-3 TRANSMIT ADJUSTMENT (continued)
1) Select an adjustment item using cursor or [
↑
] / [
↓
] keys of the PC’s keyboard.
2) Set or modify the adjustment value as speci
fi
ed using [
←
] / [
→
] keys of the PC’s keyboard, and then push the [ENTER] key.
August 2016
(Replacement page)
The underlined parts have been updated from
the previous version of the addendum.
Summary of Contents for UHF IC-FR6000
